Product Code : 04
SULPHURIC ACID PALNT
PROCESS DESCRIPTION
(Technical Grade)
Introduction : Sulphuric Acid is called King of Chemical. It is called so because of its multiple use in different spheres of life. Sulphuric acid was known to the ancient people who use to make alums with it.
Uses of sulphuric acid:
n Sulphuric acid finds its use in textile industriesn It is used in making detergentsn It is used in synthesis of chemicalsn It is used in making ferric alums, non ferric alumsn Zinc sulphate which is used as fertilizer is manufactured by using sulphuric acid as raw materialn Battery grade sulphuric acid is widely used in batteriesn It is very important chemical in the laboratoriesn It is used as a dehydrant in industry
Properties of Sulphuric Acid :
Purity 98.5+_ 0.3 sp.gravity 1.85 Iron contents not more than 0.05% Colour. Colourless to brown Boiling point 340c (decomposes)Melting point 10.5Oc
Handling: It is handled in Mild steel vessels and tankers. MS is very safe material although SS can also be used. It can cause burn if come in contact with human skin. It starts fuming in open so that vessel has to be closed. Plastics are also good material provided they have sufficient strength.
The sulphuric acid should be handled with extreme care . The person working with it should always use rubber hand gloves, gum boots, face shield and plastic helmet. The water shower should be provided near the handling point
Raw Material Sulphur
Chemical formula S wt 32.06
Colour bright yellow or black
Purity (min) 99.5%
Moisture not more than 1 %
Storage In open bins. It does not Absorb water
Density 2.046
Consumption / MT 0.332
Category covered under explosive
Fire / Burning gives pungent SO2 gas on burning. Water is used to
extinguish fire. Fire does not spread fast.
BP 444.6 OC
Melting Point 117c ( 112.8. oc to 119.2 oc)
Weather reaction nil
Firing temperature 430 oC
Sulphur is available as mined sulphur. But for Commercial purpose the Sulphur separated from Petroleum refining is used as raw material.
Sulphur is available in all the OPEC countries like, Iran , Iraq, S. Arabia, Qatar, UAE . Poland , USSR , Israel.
The approximate cost of sulphur in the international market is about US$ 58.00 Per MT
Manufacturing Process:
There are two technologies available for manufacturing of S.A. other than the lead chamber process which is obsolete & not viable.
Conventional contact process
Double contact double absorption process
Both of the technologies are same fundamentally but they differ in application. Sulphur is burnt in dry air to form sulphur dioxide. The sulphur dioxide is made to react with oxygen from air to form sulphur trioxide. The sulphur trioxide is absorbed in sulphuric acid to concentrate it. Water is added continuously to maintain the desired concentration. In conventional process the above mentioned process of conversion and absorption is performed once while in DCDA it is done twice for better efficiencies.
The conventional contact process is cheap in the cost of plant and machinery , inefficient in conversion and absorption efficiencies, poor in heat recovery. It does not meet the pollution specifications of many advance countries so this technology is no more allowed in India.
The double contact double absorption process uses costly plant and machinery , efficient in conversion & absorption efficiencies, very efficient in heat recovery, & the pollution Control. The Selection of process is entirely depends on the customer. If the customer is interested in better heat recoveries , better conversion and absorption efficiencies, lower raw material consumption per ton, and environment friendly technology, then he has to opt for DCDA process. If he has got some source to sale /use of steam, DCDA process is far superior cost wise also as the payback period for the steam system is less.
Fax : 91-1493-226000
