Product Code : 25
Cement Plant Process Description:Sulphuric Acid is called King of Chemical. It is called so because of its multiple use in different spheres of life. Sulphuric acid was known to the ancient people who use to make alums with it. Sulphuric Acid:
Uses of Sulphuric Acid:
Properties Of Sulphuric Acid:VSK technology is used to manufacture clinker on small scale. The plant is small and easy to operate. The Raw Materials:
Purity
98.5+_ 0.3
sp.gravity
1.85
Iron contents
not more than 0.05%
Colour
Colourless to brown
Boiling Point
340c (decomposes)
Melting point
10.5Oc
Viscosity
viscous
It is handled in Mild steel vessels and tankers. MS is very safe material although SS can also be used. It can cause burn if come in contact with human skin. It starts fuming in open so that vessel has to be closed. Plastics are also good material provided they have sufficient strength. The sulphuric acid should be handled with extreme care . The person working with it should always use rubber hand gloves, gum boots, face shield and plastic helmet. The water shower should be provided near the handling point. Raw MaterialSulphur
Chemical formula
S wt 32.06
Shape / size Colour
crystals & lumps / powder bright yellow or black
Purity (min)
99.5%
Moisture
not more than 1 %
Storage
In open bins. It does not Absorb water
Density
2.046
Consumption / MT
0.332
Category
covered under explosive
Fire / Burning
gives pungent SO2 gas on burning. Water is used to extinguish fire. Fire does not spread fast.
BP
444.6 OC
Melting Point
117c ( 112.8. oc to 119.2 oc)
Weather reaction
nil
Firing temperature
430 oC
Sulphur is available as mined sulphur. But for Commercial purpose the Sulphur separated from Petroleum refining is used as raw material.Sulphur is available in all the OPEC countries like, Iran , Iraq, S. Arabia, Qatar, UAE . Poland , USSR , Israel.The approximate cost of sulphur in the international market is about US$ 58.00 Per MT Manufacturing Process:There are two technologies available for manufacturing of S.A. other than the lead chamber process which is obsolete & not viable.Conventional contact process. Double contact double absorption process. Both of the technologies are same fundamentally but they differ in application. Sulphur is burnt in dry air to form sulphur dioxide. The sulphur dioxide is made to react with oxygen from air to form sulphur trioxide. The sulphur trioxide is absorbed in sulphuric acid to concentrate it. Water is added continuously to maintain the desired concentration. In conventional process the above mentioned process of conversion and absorption is performed once while in DCDA it is done twice for better efficiencies. The conventional contact process is cheap in the cost of plant and machinery , inefficient in conversion and absorption efficiencies, poor in heat recovery. It does not meet the pollution specifications of many advance countries so this technology is no more allowed in India. The double contact double absorption process uses costly plant and machinery, efficient in conversion & absorption efficiencies, very efficient in heat recovery, & the pollution Control. The Selection of process is entirely depends on the customer. If the customer is interested in better heat recoveries , better conversion and absorption efficiencies, lower raw material consumption per ton, and environment friendly technology, then he has to opt for DCDA process. If he has got some source to sale /use of steam, DCDA process is far superior cost wise also as the payback period for the steam system is less.
Fax : 91-1493-226000
